::: UNITECH INSTRUMENTATION :::
MUMBAI - 400 086

16 DIGITAL INPUT MODULE
SCN - 16DIP

 CLASSIC FEATURES :
 * ECONOMICAL & EASY SETUP
 * REMOTE INPUT / OUTPUT MODULES
 * MODBUS COMMUNICATION PROTOCOL
 * INPUTS PHYSICALLY AND OPTICALLY ISOLATED

* WATCHDOG TIMER INSIDE
* RS485 SERIAL INTERFACE
* COUNTER INPUT.


GENERAL DESCRIPTION :-
The Module SCN-16DIP is used for digital input. It consist of 16 digital input. All inputs are physically optical isolated. It has indication of inputs status. The modules are the economical and easy to setup of a remote data acquisition and control system. Remote I/P modules allow reading of digital signals, frequency measuring, event counting. Modules accept power from 220VAC / 24VDC & can be easily mounted on a Din rail. All the modules provide a serial RS- 485 interface with a Modbus communication protocol; fully isolated converters and repeaters are available to set-up the connection network between the modules and the Supervisory Computer. The WINLOG SCADA software provides and operator interface in a Windows environment for real-time supervision, historic trend analysis and alarm management. All the data are recorded in history databases in a format accessible from the main software packages (EXCEL, ACCESS etc.) An integrated development environment provides different
tools for the easy & intuitive creation of various applications.
 

No. of Channels :

16 digital inputs optically isolated.
Type of Inputs : Potential free inputs. proximity, Infrared, Limit switch.
Indication : 3 mm L.E.D indication for system operation and input Status.
Watchdog : Built in failsafe Watch-dog timer
Serial Port : Optical isolated RS485 port with Modbus RTU protocol.
Serial Settings : It has 8 way DIP switch on front bazel which is used for Baud rate
& unit ID no. setting. Set DIP switch before the power is switched ON.
Baud Rate Settting : Switch 1 ON 19200, switch 1 OFF 9600 baud rate.
ID No. Setting : Switch 8 to 4 are used for ID no. Setting.ID setting is in binary form.
Please Refer operating Manual.
Supply voltage : 230 VAC A10%, 50Hz or 24VDC.
Connections : Screw type, total 32 input connection for 16 input.
Excitation Supply : 24 VDC, @ 100 mA output is available for external Excitation supply or you can use external DC supply (to beSpecified).
Mounting : Din rail mounting
Dimension : 100(H) X 200(W) X 70(D) in mm.
Weight : 900 gm.
Ordering Information: Supply voltage, Detail application, SCADA software.

Designed & Hosted by : MID   Promoted by : GID