FLOW TOTALISER

* Used latest microcontroller based control technology.
* 0.01, 0.1, 1 resolution programmable rate.
* 6-digit 0-999999 count, for total, 0-5999 rate for full
   range w.r.t 4 to 20mA, 0 to 75mV, RTD.
* Two set point with bright L.E.D for RL1 & Rl2.
* Accept input form standard flow transmitter having
   output of 4 to 20mA or 0 to 1VDC.
* Display both flow rate & flow totalizer by press of a (+)
   key.
* Two bright L.E.Ds for RL1 & RL2 indication
* Front & remote reset facility for totalizer.
* Non-volatile battery backup to hold data in case of power
   failure.
* Built-in watch-dog circuit for fail safe operation.
* Program setting by three soft membrane keys on the
   front panel.
* Compact, Standard, din size & easy to install.
* Optional flameproof version is available on request.

Input :

Automatic Cold Junction Compensation for all thermocouples.

Display :

4 digits of 13 mm. height L.E.D for process value display
1 digit of 13 mm. height L.E.D for channel number display.
2 L.E.Ds for Alarm Indication. A L1 & A L 2.

Setting :

5 feathers touch keys on front panel.

Alarm :

2 independent set points with 2 relay output.

Output :

1 NO/C/NC Relay contact rated 230V / 5A for relay1 (AL1) & relay2 (AL2).

Port :

RS-232/RS-485 Serial port with Modbus output or parallel centronics
port for 80 column computer printer for direct printout.

Supply :